Hydro Ban Quick Cure is a rapid, ready-to-use waterproofing membrane with wet-sure technology that allows the membrane to cure even in humid, cold or damp environments. Quick Cure waterproofing membrane allows for flood testing within just 30 minutes - the contractor can install a full shower system all in one day.
-
Designed for both commercial and residential tile installations suited for interior substrates. Install tile, brick and stone directly onto membrane
-
Easily applied with a paint brush or roller, it bonds directly to metal, PVC, stainless steel and ABS drain assemblies
-
Can be used in humid, cold and damp environments
-
Allows for flood testing in 30 min. at 70°F (21°C) or higher
-
Allows for crack isolation up to 1/16 when applied at 30 mils thick, anything over will require the use of fabric within any cove, corner, movement joint and other areas of transition
-
Thin; only 0.012" (0.3 mm) thick when cured
-
Exceeds ANSI A118.10 and Eco-friendly, Low VOC
-
No solvents and non-flammable
-
Uses : Swimming pools, fountains and water features. Shower pans, stalls and tub surrounds. Industrial, commercial and residential bathrooms and laundries. Spas and hot tubs. Kitchens and food processing areas. Terraces and balconies over unoccupied spaces. Countertops
-
Suitable Substrates : Concrete, concrete and brick masonry, cement mortar beds, cement plaster, gypsum wallboard, exterior glue plywood, ceramic tile and stone, cement Terrazzo, cement backer board and poured gypsum underlayment
