Mapelastic Turbo is a two-component, rapid-drying, cementitious-binder-based membrane with fine-grained selected aggregates, special admixtures and synthetic polymers in water dispersion for interior and exterior installations under ceramic tile or stone in residential, commercial and industrial intermittent wet or submerged environments. Applied easily with a roller or brush, Mapelastic Turbo provides an excellent barrier to protect adjacent rooms and floors below from water damage. Mapelastic Turbo exceeds ANSI A118.10 and ANSI A118.12 standards and is compatible with polymer-modified cement-based mortars (ANSI A118.4 or better) or epoxy mortars (ANSI A118.3).

• For waterproofing and crack isolation
• Rapid-setting: Tiling in as little as 90 minutes
• Flood-test after 3 to 4 hours
• Works on substrates where moisture is present up to 12 lbs. (5.44 kg) or 95% relative humidity (RH)
• Easy-mixing properties
• Pot life of greater than 45 minutes
• Durable and flexible, bonding to a wide range of surfaces
• Smooth consistency and flowable
• Applied with roller or brush – easy to install over flat, curved and irregular surfaces
• Prevents in-plane floor cracks up to 1/8" (3 mm) from transmitting through tile and stone